Equipment Guide


Home  |  Equipment  |  Boyd Lab Safety Canvas Course  |  Student Equipment Training Signup  |  Job Submissions

Woodworking Equipment

GCM12SD 1412 Thumbnail 1 DELTA 6-in x 48-in Belt 15-Amp Benchtop Sander at Lowes.com
 Bosch 12” COMPOUND SLIDING MITER SAW (GCM12SD)

  • Used for cutting wood only
  • Vertical blade angle adjustable: 52 degrees left, 60 degrees right
  • Built-in adjustable fences and clamps
  • Crosscut up to 3 1/2″ by 13 1/2″ lumber
LAGUNA BAND SAW (14|12)

  • Used for making either straight or curved cuts in wood and some plastics
  • Table can be adjusted to a specific
DELTA DISC/BELT SANDER (31-300)

  • Multiple sanding surfaces for greater flexibility
  • Not for use with aluminum
  • Used to smooth corners, edges and for other light duty grinding
DeWalt DW735 13" Planer  Hegner Multimax 22 Variable Speed Scroll Saw
 ELLIS DRILL PRESS (Ellis 9500 and Ellis 9400)

  • Used for making holes in both wood and metal
  • Digital spindle speed control
  • Multiple clamping options for flexibility
  • Many different styles of bits to choose from
 DeWALT 12″ PLANER (DW735)

    • Can plane wood up to 12″ wide and a minimum of 12″ long
    • Removes a small amount of material from the surface of wood to produce a very smooth surface
    • Removes 1/16” maximum per pass
  • Feeds wood through machine to control removal rate
 HEGNER SCROLL SAW (Multimax-22V)

  • Used to create intricate cuts in wood and some plastics
  • Adjustable head speed for different materials
  • Table adjusts to specific angle from the horizontal
Oscillating Spindle Sander - (OS-2424) Rockler Cast Iron Router Table Master Kit with Cabinet and Pro Lift Amazon.com: SAWSTOP 10-Inch Professional Cabinet Saw, 1.75-HP, 36-Inch Professional TGlide Fence System (PCS175-TGP236)
BAILEIGH OSCILLATING SPINDLE SANDER (OS-2424)

  • Used to remove a relatively large amount of wood from internal curved surfaces
  • Different size spindles available to match the curve being sanded
  • Spindle moves up and down as well as spinning to ensure material is removed without burning
  • Table can be tiled to accommodate for different angled features
 ROCKLER TABLE ROUTER (BMX61284)

SAWSTOP 10″ INDUSTRIAL CABINET SAW (ICS31230)

 

Metal Working Equipment

Baileigh Industrial Slip Roll, 1 HP, Single Phase, 220V, SR-5016 Bridgeport® Series I Standard Knee Mill
BAILEIGH SLIP ROLLER (SR5016)

  • Used to create a curve in sheet    metal or wire with a minimum final diameter of 4 1/2”
  • Not to exceed 50” wide 16 gauge mild steel
  • 3” diameter rollers
  • Adjustable for material thickness
  • Can also roll wire in thicknesses of 0.513”, 0.407”, and 0.335”
 BRIDGEPORT Knee MILL with Accurite G1 Control Unit

Used for manually machining components in 2D

  • Can be used manually to create simple rectangular geometries
  • Can be used semi-automatically with conversational control to do more complicated features (lines, rectangular pockets, odd diameter circular pockets, hole patterns, etc.)
  • Variety of supporting tools and equipment

CLAUSING CNC Knee MILL with Accurite G2 Control Unit

Used for manually machining components in 2D and 3D

  • Can be used manually to create simple rectangular geometries
  • Can be used semi-automatically with conversational control to do more complicated features (lines, rectangular pockets, odd diameter circular pockets, hole patterns, etc.)
  • Can use .nc files to run in full 3-axis mode with a single tool
  • Variety of supporting tools and equipment

 87-115-613 Main Image  
CLAUSING LATHE (15″)

  • Used for machining round symmetrical components
  • Variable speed up to 1200 rpm
  • Can machine stock from 3/64” to 12” diameter
  • 40″ between Centers
  • Two axis digital readout
  • Two axis auto-feed

 

DAKE-JOHNSON VERTICAL BAND SAW

  • Used for rough-sizing metals and some plastics
  • Multiple clamping options for flexibility
  • Hydraulically powered table feed

 

 

 DAYTON GRINDING and POLISHING CENTER

  • Used for cleaning and de-burring metal components
  • Wire wheel used for removing rust, gasket material, etc.
  • 2 different roughness stone wheels used for removing material from ferrous metals only
  • Polishing wheel for making smooth surfaces or de-burring softer metals
 KALAMAZOO DISC GRINDER WITH DUST COLLECTION

  • Used for smoothing edges and de-burring metal components
  • Produces smoother finish than bench grinder
ELLIS DRILL PRESS

  • Used for making holes in both wood and metal
  • Digital spindle speed control
  • Multiple clamping options for flexibility
  • Many different styles of bits to choose from
ELLIS HORIZONTAL BAND SAW

  • Used for rough sizing metal stock, especially long pieces
  • Blade tilts for making miter cuts
  • Adjustable feed rate and blade speed
  • Multiple clamping options for flexibility

 

Miller Dynasty 210 TigRunner (907816002)
HYPERTHERM PLASMA CUTTER

  • Used to make clean accurate cuts in metal up to 3/4”
  • Can cut up to 22” per minute when cutting mild steel
  • Can be paired with PlasmaCAM CNC table
JD SQUARED PIPE BENDER

Used to make accurate bends in square and round tubing

  • Bends round tubing that is 1/2” to 2 1/2” diameter
  • Bends square tubing that is up to 1 1/2” diameter
  • Bends schedule 40 pipe up to 2” in diameter
  • Uses 10 ton pneumatic cylinder
MILLER DYNASTY 200 TIG WELDER

  • Used to weld both steel and aluminum
  • Welds steel that is 0.004” to 0.25” thick
  • Welds aluminum that is 0.02” to 0.25” thick

 

Miller Millermatic 252 MIG Welder Complete Package (907321) Miller Millermatic 355 Pulsed MIG Welding Pkg w/Aluma Pro Gun (951927)
 MILLERMATIC 300 MIG WELDER

Used to weld mild steel. Can be used to weld aluminum or stainless steel with the special setups.

 MILLERMATIC 355 ALUMINUM MIG WELDER

  • Welds Aluminum that is 18 gauge up to 1/2” thick
STARK USA SPOT WELDER

Used for spot welding thin materials together

  • 1/8″combined thickness capacity
  • Used to spot weld uncoated mild steel, galvanized steel, or stainless sheet steel
  • Throat depth 6″

 

* Shown with optional Slug Type Angle Shear, only available in the Power Cavity
MILLER OXY-ACETYLENE CUTTING TORCH

Used for cutting, welding and brazing metals

  • Produces rough edged cuts that must be finished by grinding or sanding
  • Different tips available for different operations
  • Can be used to heat parts
 UNI-HYDRO IRON WORKER

Used for punching, shearing, notching, and bending mild steel

 BAILEIGH 75 TON HYDRAULIC PRESS (HSP-75A)

Hydraulic press for removing or installing press-fit components and bending components

  • 75 Ton Capacity
  • 31″ Working Width
  • 9.8″ Stroke
  • 24″ Wide bending attachment for bending sheet metal available
Tennsmith Box and Pan Hand Brake, 96
 TENNSMITH BRAKE

Used for bending sheet metal and some plastics

  • 50″ max bending width
  • Maximum working thickness is 12 gauge mild steel

TENNSMITH SHEAR

Used for cutting sheet metal and some plastics

  • Cut width up to 50″ wide
  • Cuts up to 16 gauge mild steel
  • Cuts up to 20 gauge stainless steel
  • Cuts up to .09″ aluminum

 

TENNSMITH NOTCHER

Used to make notches in sheet metal

  • Notches will be “V” shaped with 90° corner
  • Sheet metal may exhibit some distortion after notching process

Haas Vm2 CNC MILL

Used for quickly machining complex components out of metal stock

  • Machines 2D or 3D components
  • 10,000 RPM Spindle
  • Indexer may be installed to allow rotation of workpiece about a fourth axis in small increments
  • Bed travels 30” (X-axis) by 20” (Y-axis) by 20” (Z-axis)
  • Uses MasterCAM .NC code to program component geometry
Loading...